Table of Contents
Advertisement
6. Valet switch (CON 4)
This switch is used to program Tach and other functions. Mount the switch in an easily
accessible location under the dash. Plug the switch into to the proper connector on the
main module.
7. LED (CON 5)
The LED illuminates to show the status of the alarm. Mount the LED in a location
visible from as many windows of the vehicle as possible. Plug the LED into the
proper connector on the main module.
8. Shock sensor (CON 6)
Mount the shock sensor to a solid structure underneath the dash. Connect to the proper
port on the unit. Help reduce false alarms by adjusting the shock sensor so that a medium
impact (no damage to vehicle) triggers the warning mode. A severe impact (damages
vehicle) should trigger the full alarm. DO NOT test by hitting the body of the vehicle or
the glass!
* The shock sensor needs to be firmly mounted to steering colum. Make sure you
are not restricting any moving parts.
18
v4.2
Advertisement
Table of Contents
