The appliance does not
heat up.
The lamp does not oper-
ate.
Steam and condensation
collect on the food and
in the appliance.
If you cannot find a solution to the prob-
lem yourself, contact your dealer or the
service centre.
The necessary data for the service centre
is on the rating plate. The rating plate is
We recommend that you write the data here:
Model (Mod.)
Product number (PNC)
Serial number (Serie:)
11. INSTALLATION
WARNING!
Refer to the Safety chapters.
To lift the appliance, do not use
the door handle.
Problem
min.
3 mm
Possible cause
The fuse in the fuse box
is released.
The lamp is defective.
You left the dish in the
appliance for too long.
on the front frame of the appliance cavi-
ty.
Remedy
Do a check of the fuse. If
the fuse is released more
than one time, contact a
qualified electrician.
Replace the lamp.
Do not keep the dishes
in the appliance for lon-
ger than 15 - 20 minutes
after the cooking ends.
.........................................
.........................................
.........................................
The handle profile can be re-
placed to match the décor of
your kitchen. The change must
be done by an authorized per-
son. Use only genuine replace-
ment parts.
ENGLISH
25
Need help?
Do you have a question about the EHB and is the answer not in the manual?
Questions and answers