Figure 3-2. Ice 5700 Printer Paper Installation - Hypercom ICE 5700 Hardware And Installation Operators Manual

Hide thumbs Also See for ICE 5700:

Table of Contents

Chapter 3

4. At the main terminal display, touch Terminal Menu.

5. Touch the arrow. The Terminal Main menu prompt appears.

6. Touch Setup. The Setup menu appears.

7. Touch Printer. The Printer prompt appears.

8. Touch Paper Feed. The Paper Feed menu appears.

9. Touch Paper Feed until the paper feeds through the printer tear bar.

If the printer fails to advance the paper, you may need to check the printer ON/OFF settings.

OTE

Complete the following steps to verify the settings.

a. At the main terminal display, touch Terminal Menu.

b. Touch the arrow. The Terminal Main menu prompt appears.

c. Touch Setup. The Setup menu appears.

d. Touch Printer. The Printer prompt appears.

e. Touch On/Off. The Printer Toggle menu prompt appears. The menu displays Printer is

disabled. Enable?.

Touch Yes. The terminal changes the printer settings to Enabled and returns to the main

menu. Repeat steps 4 through 9.

10. Touch Quit. The system returns to the main terminal menu.

11. Close the printer paper cover.

3-6

Figure 3-2. ICE 5700 printer paper installation

ICE 5700 Hardware and Installation Operators Manual

940310-001, rev. A

Table of Contents

Do you have a question about the ICE 5700 and is the answer not in the manual?