Connecting 3 ½" Diskette Drive; Disconnecting 3 ½" Diskette Drive - Toshiba TE2000 User Manual

Connecting 3 ½" diskette drive
To connect the drive, plug the diskette drive connector into a USB port.
Refer to the figure below.
Make sure the connector is right side up and properly aligned with the
socket. Do not try to force the connection, doing so can damage the
connecting pins.
If you connect the diskette drive after turning on the computer, it will take
about 10 seconds for the computer to recognise the drive. Do not
disconnect and reconnect before 10 seconds has elapsed.
Disconnecting 3 ½" diskette drive
When you have finished using the diskette drive, follow the procedures
below to disconnect it:
1. Wait for the indicator light to go out to make sure all diskette activity
has stopped.
If you disconnect the diskette drive or turn off the power while the
computer is accessing the drive you may lose data or damage the diskette
or the drive.
2. Pull the diskette drive connector out of the USB port.
TOSHIBA TE2000
Connecting the diskette drive to the computer
Operating Basics
4-11