Toshiba TE2000 User Manual page 112

Device Config
Device Configuration
This option lets you set the device configuration.
All Devices
Setup by OS
Parallel/Printer
This tab lets you set the Printer Port Type. Use the Windows Device
Manager to make settings for the Parallel port.
Parallel Port Mode
The options in this tab are ECP and Standard Bi-directional.
ECP
Standard
Bi-directional
Pointing Devices
Pointing Devices
This tab lets you select Auto-Selected and Simultaneous.
Auto-Selected
Simultaneous
TOSHIBA TE2000
BIOS sets all devices.
Operating system sets devices that it can
control.
Sets the port type to Extended Capabilities Port
(ECP). For most printers, the port should be set
to ECP. (Default)
This setting should be used with some other
parallel devices.
If a PS/2 mouse is connected to the computer
when you turn on the power, the PS/2 mouse is
enabled and the AccuPoint II is disabled.
Otherwise, the AccuPoint II is enabled. (Default)
Enables both the AccuPoint II and a PS/2
mouse.
HW Setup and Passwords
7-6