Radio Characteristics - Toshiba TE2000 User Manual

Radio characteristics

Radio characteristics of Wireless LAN cards may vary according to:
I
Country/region where the product was purchased
I
Type of product
Wireless communication is often subject to local radio regulations.
Although Wireless LAN networking products have been designed for
operation in the license-free 2.4 GHz band, local radio regulations may
impose limitations on the use of Wireless communication equipment.
Refer to the flyer Information to the User for regulatory information that
may apply in your country/region.
R-F Frequency Band
Modulation
Technique
Spreading
Bit Error Rate (BER)
Nominal Output
Power
Transmit Rate
Receiver Sensitivity -83 dBm
Delay Spread
(at FER of <1%)
TOSHIBA TE2000
2.4GHz (2400-2483.5 MHz)
Direct Sequence Spread Spectrum
I
I
I
11-chip Barker Sequence
Better than 10
15 dBm
High Speed Medium
Speed
11 Mb/s 5.5 Mb/s
-87 dBm
65 ns 225 ns
CCK for High & Medium Transmit Rate
DQPSK for Standard Transmit Rate
DBPSK for Low Transmit Rate
-5
Standard
Speed
2 Mb/s
-91 dBm
400 ns
Wireless LAN
Low Speed
1Mb/s
-94 dBm
500 ns
I-15