Advanced Port Replicator - Toshiba TE2000 User Manual

Advanced Port Replicator

In addition to the ports available on the computer, the Port Replicator
provides, audio line-out jack, line-in jack and separate ports for PS/2
mouse and PS/2 keyboard. The Port Replicator connects directly to the
docking interface on the bottom of the computer. The AC adaptor
connects the Advanced Port Replicator to a power source.
The computer must be configured properly before connecting to a LAN.
Logging onto a LAN using the computer's default settings could cause a
malfunction in LAN operation. Check with your LAN administrator
regarding set-up procedures.
The following ports and accessories are available on the Advanced Port
Replicator.
I
One RJ45 LAN jack
I
One RJ11 Modem jack
I
External monitor port
I
Parallel port
I
Serial port
I
PS/2 mouse port
I
PS/2 keyboard port
I
DC IN socket
I
Security lock slot
I
Audio line-in, line-out jacks
I
Universal Serial Bus (two) ports
I
i.LINK (IEEE 1394) port (This port is not supported by the computer.)
I
DVI port (This port is not supported by the computer.)
When an Advanced Port Replicator is connected to the computer, remove
all cables connected to the computer.
The TE2000 does not support the DVI and i.LINK ports on the Advanced
Port Replicator.
TOSHIBA TE2000
Optional Devices
8-11