Advanced Port Replicator Iil - Toshiba TECRA M3 User Manual

Optional Devices

Advanced Port Replicator IIl

In addition to the ports available on the computer, the Advanced Port
Replicator lll provides serial port and separate ports for PS/2 mouse and
PS/2 keyboard. The Advanced Port Replicator connects directly to the
docking interface on the underside of the computer. The AC adaptor
connects the Advanced Port Replicator to a power source.
The computer must be configured properly before connecting to a LAN.
Logging onto a LAN using the computer's default settings could cause a
malfunction in LAN operation. Check with your LAN administrator
regarding set-up procedures
■
You must connect the AC adaptor before you connect to an Advanced
Port Replicator III.
■
When an Advanced Port Replicator III is connected to the computer,
you can not use the following computer's ports: Modem jack, LAN jack,
DC IN 15V jack, Parallel port, External monitor port, i.LINK (IEEE 1394)
port, Video-out jack.
The following ports and accessories are available on the Advanced Port
Replicator III.
■
RJ45 LAN jack
■
RJ11 Modem jack
■
External monitor port
■
Parallel port
■
Serial port
■
PS/2 mouse port
■
PS/2 keyboard port
■
DC IN 15V jack
■
Security lock slot
■
Audio line-in, line-out jacks
■
Universal Serial Bus 2.0 port (four)
■
i.LINK (IEEE 1394) port
■
DVI port (This port is not supported by the computer.)
8-22
.
User's Manual