Using Outcalling - Avaya PARTNER User Manual

Using Outcalling

About
Outcalling
Turning
Outcalling
On or Off
Setting
Your
Outcalling
Numbers
If you turn on Outcalling, PARTNER Messaging calls the
numbers which you have programmed to signal that a new
message has arrived in your mailbox. You can have Outcalling
for all messages or just Priority messages.
HINT:
If you choose Outcalling for Priority messages only,
give your callers instructions on how to leave a Priority message.
Check with your System Manager to see if your mailbox has
been assigned Outcalling privileges.
Outcalling continues until one of the following happens:
During the Outcalling message call, you press
cancel Outcalling until a new message arrives for you.
You log in to your mailbox and listen to the message.
The interval specified in your Outcalling Schedule expires.
PARTNER Messaging has called all numbers in your Outcalling
List the number of times specified by the Cycles option.
1: Log in to Voice Messaging.
2: Press
to select Outcalling.
3: Press
then choose an option:
Press to turn Outcalling On for all messages.
Press to turn Outcalling On for Priority messages only.
Press to turn Outcalling Off.
Press to return to the Outcalling menu.
1: Log in to Voice Messaging.
2: Press to select Outcalling.
3: Press
to change your list of Outcalling Numbers.
4:
Choose the entry number [1 – 5].
If an Outcalling Number is programmed, you hear the Outcalling
entry information. If an Outcalling Number is not programmed, you
hear, "Entry number x is not used."
to
continued...