Table of Contents
Advertisement
Insert the new HEX unit into the same position as the HEX unit you removed.
1.
IMPORTANT:
thread type came from which hole location on the shipping bracket.
Install the two HEX unit shipping brackets.
2.
Align the HEX unit shipping brackets to the screw holes on the HEX unit and the MCS frame (1).
a.
Using a T-25 Torx driver, secure the two HEX unit shipping brackets to the heat exchanger unit
b.
by inserting and tightening four Torx screws (2).
Keep the Torx screws separated according to their thread type and note which
Removal and replacement procedures 73
Advertisement
Table of Contents
