Table of Contents
Advertisement
Using an 8 mm Allen wrench, secure the cover to the magnetic valve by inserting and tightening four
3.
socket screws.
Replace the magnetic solenoid valve
4.
Using the counter hold wrench to hold the fitting in place and the water hose fitting wrench to tighten
5.
the water hose (both wrenches included in your original hardware kit), connect the In and Out water
hoses to the bottom heat exchanger unit.
Replace the air deflector plate
6.
Relocate the power inlet box back into position
7.
on page 95).
Replace the bottom fan unit
8.
Reconnect the main water lines.
9.
Complete the operation checklist (on page 111).
10.
("Replacing the magnetic solenoid
("Replacing the air deflector
("Relocating the power inlet box back into
("Replacing the bottom fan
Technician repair removal and replacement procedures 122
valve" on page 84).
plate" on page 34).
unit" on page 45).
position"
Advertisement
Table of Contents
