Table of Contents
Advertisement
Insert the new heat exchanger unit into the same position as the heat exchanger unit you removed.
1.
IMPORTANT:
thread type came from which hole location on the shipping bracket.
Install the two heat exchanger unit shipping brackets.
2.
Align the heat exchanger unit shipping brackets to the screw holes on the heat exchanger unit
a.
and the MCS frame (1).
Using a T-25 Torx driver, secure the two heat exchanger unit shipping brackets to the heat
b.
exchanger unit by inserting and tightening four Torx screws (2).
Keep the Torx screws separated according to their thread type and note which
Removal and replacement procedures 64
Advertisement
Table of Contents
