Table of Contents
Advertisement
Relocate the power inlet box.
4.
Remove the air sealing plate.
5.
Remove the air deflector plate.
6.
Remove the condensation pump and sensors.
7.
page 47)
Remove the AC transfer switch.
8.
Remove the plastic lock washer from above the paddle-wheel sensor.
9.
Unscrew the plastic screw cap securing the paddle-wheel sensor to the flow meter.
10.
Lift the paddle-wheel sensor up and off the flow meter.
11.
("Relocating the power inlet
("Removing the air sealing
("Removing the air deflector
("Removing the condensation pump and
("Removing the AC transfer
box" on page 93)
plate" on page 35)
plate" on page 33)
switch" on page 26)
Removal and replacement procedures 55
sensors" on
Advertisement
Table of Contents
