Supermicro C2SEA User Manual page 74

C2SEA/C2SEE User's Manual
Hardware Health
This feature allows the user to monitor Hardware Health of the system and review
the status of each item when displayed.
System Temperature,
CPU Temperature
Fan Speed Control Modes
This feature allows the user to decide how the system controls the speeds of the
onboard fans. The CPU temperature and the fan speed are correlative. When
the CPU on-die temperature increases, the fan speed will also increase, and vice
versa. Select Workstation if your system is used as a Workstation. Select Server
if your system is used as a Server. Select "Full Speed @12V" to disable the fan
speed control function and allow the onboard fans to constantly run at the full speed
(12V). The Options are: 1. Full Speed @12V, 2. Optimized Server w/4-pin, and 3.
Optimized Workstation w/4-pins.
Fan1-Fan5 Speeds:
If the feature of Auto Fan Control is enabled, the BIOS will automatically display
the status of the fans indicated in this item.
Voltage Monitoring
Vcore, AVcc, +3.3V, +12V, VDIMM, +5V, -12V, 3.3VStandby, and Vbatt.
Note: In the Windows OS environment, the Supero Doctor III settings take
precedence over the BIOS settings. When fi rst installed, Supero Doctor III
adopts the temperature threshold settings previously set in the BIOS. Any
subsequent changes to these thresholds must be made within Supero Doc-
tor, since the SD III settings override the BIOS settings. For the Windows
OS to adopt the BIOS temperature threshold settings, please change the
SDIII settings to be the same as those set in the BIOS.
Confi guration
4-16