Supermicro C2SEA User Manual page 25

Chapter 2: Installation
8. Repeat Step 6 to insert all four heatsink
fasteners into the mounting holes.
9. Once all four fasteners are securely insert-
ed into the mounting holes and the heatsink
is properly installed on the motherboard, con-
nect the heatsink fan wires to the CPU Fan
connector.
Removing the Heatsink
1. Unplug the power cord from the power
supply.
2. Disconnect the heatsink fan wires from the
CPU fan header.
3. Use your fi nger tips to gently press on the
fastener cap and turn it counterclockwise to
0
make a 1/4 (90 ) turn, and then pull the fas-
tener upward to loosen it.
4. Repeat Step 3 to loosen all fasteners from
the mounting holes.
5. With all fasteners loosened, remove the
heatsink from the CPU.
2-5