Connect The Power Cords To The Server - Sun Microsystems Sun Fire V440 Installation Manual

Connect the Power Cords to the Server

1. Unlock and open the right system door.
2. Insert the system key into the system control keyswitch.
Note that you have two sizes of system keys. The smaller key enables you to close
the system door even while the key is in the system control keyswitch. The door
cannot be closed with the larger key in the keyswitch.
3. Turn the system control keyswitch to the Standby position.
4. Slide the server out of the rack far enough to give you convenient access to the
back of the server.
30 Sun Fire V440 Server Installation Guide • July 2003
HDD 3
PS 0
HDD 2
HDD 1
HDD 0
Standby
PS 1