The plastic bags of hardware contain screws and nuts that are shown below in actual
size.
10-32
Any screws not used for rackmounting are spares.
Note – Bar nuts are required (but not included) for non-threaded cabinets. See the
instructions provided with your cabinet for more information.
Tools Required for Rackmounting
Phillips No. 2 screwdriver (Use to tighten 10-32 and M6 screws.)
Set of appropriate Allen wrenches to remove the side panels on some cabinets
Adjustable wrench to tighten the nuts on the mounting brackets
8
Sun Fire V440 Server Installation Guide • July 2003
8-32
M6
M4
8-32
M6
10-32