Ricoh 2045 Operating Instructions Manual page 37

Problem
No transmission Check using the following procedure:
when you use
A
1394 interface con-
B
nection
C
D
E
Printing stops and Follow the one of the procedures below:
a paper error is
• Press [Job Reset] on the display panel to stop printing. Place the custom
displayed if the
custom size paper
• Select the paper feed tray with custom size paper, and then press [Con-
in the paper feed
tray is specified
when printing
with the Post-
Script 3 printer
driver.
When connecting Confirm that USB Printing Support is installed on your computer.
the machine using
the USB 2.0 inter-
face, the first page
of a print job that
contains a large
volume of data is
printed, and the
rest of the pages
are not printed.
Note
❒ If the problem cannot be solved, contact your sales or service representative.
Causes, Descriptions, and Solutions
Confirm the IEEE 1394 interface cable is connected securely.
Restart the computer.
If the error occurs even after executing the above operation, proceed to
the following steps.
Unplug the IEEE 1394 interface cable connected to the computer.
Run the utility tool for the IEEE 1394 interface board, which is stored in
the following path on the CD-ROM labeled "Printer Drivers and Utili-
ties":
\UTILITY\1394\
Reference
For more information about using the utility tool for IEEE 1394, see
the README file in the same directory on the CD-ROM.
Restart the computer.
size paper in the bypass tray, and then start printing.
tinue] to force printing.
Reference
See "Installing the Printer Driver Using USB", Printer Reference 1.
Other Printing Problems
4
31