Troubleshooting; Error & Status Messages On The Display Panel - Ricoh 2045 Operating Instructions Manual

Error & Status Messages on the Display
Panel
❖ ❖ ❖ ❖ Status messages
Message
Hex Dump Mode
Offline
Please Wait
Printing...
Ready
Resetting Job...
Waiting...
❖ ❖ ❖ ❖ Alert messages
Messages/Second messages
Close duplex unit cover.
Collate has been cancelled.
DIMM has a problem.

4. Troubleshooting

In Hex Dump mode, the machine receives data in hexadecimal
format. Turn off the machine after printing, and then turn back
on.
The machine is offline. Set the machine online by pressing [On-
line] on the display panel to start printing.
The machine is readying the development unit. Wait for a
while.
The machine is printing. Wait for a while.
The default ready message. The machine is ready for use. No
action is required.
The machine is resetting the print job. Wait until "Ready" ap-
pears on the display panel.
The machine is waiting for the next data to print. Wait for a
while.
Description
The cover of the duplex unit is
open.
The collate print function has
been cancelled.
An error has occurred in the
DIMM inside the machine.
Status
Solution
Close the cover of the duplex
unit.
Increase memory capacity.
When adding a memory mod-
ule to the machine, contact
your sales or service represen-
tative.
Contact your sales or service
representative.
21