Ricoh 2045 Operating Instructions Manual page 30

Troubleshooting
Messages/Second messages
Parallel I/F board has a prob-
lem.
Print overrun.
RPCS graphic error.
4
RPCS memory overflow.
RPCS syntax error.
Selected paper tray is in use
for another function. Please
wait.
Shift tray has a problem. Call
service representative.
Staple has been cancelled.
Staple unit is in use for anoth-
er function. Please wait.
DToner is almost empty.
Unauthorized user access.
Print job has been cancelled.
24
Description
An error has occurred in the
parallel interface board.
The image data has been
thinned out due to image com-
pression.
There is insufficient graphics
memory to print the data.
A memory overflow occurred
during the print job. After part
of the data is printed, the print
job is suspended.
Bidirectional transmission
may not be working properly
or the RPCS™ printer driver
settings may not be correct.
The specified paper tray is in
use by another function such
as copier function.
A malfunction occurs when
using the shift function.
Staple printing has been can-
celled.
The staple unit is in use by an-
other function such as copier
function.
The toner has almost run out.
Print job cancelled due to user
restrictions.
Solution
Contact your sales or service
representative.
Increase memory capacity.
When adding a memory mod-
ule to the machine, contact
your sales or service represen-
tative.
Specify the correct memory
capacity in the [Change Acces-
sories..] option in the RPCS™
printer driver's print settings
tab.
To print the image correctly,
add memory to the machine,
or reduce the resolution of the
image.
To print the image correctly,
add memory to the machine,
or reduce resolution.
Confirm the option settings
for the printer driver match
the options installed on the
machine.
Wait until the other function
has finished using the speci-
fied paper tray.
Contact your sales or service
representative.
Confirm paper feed direction,
paper orientation and stapling
position.
Wait until the other function
has finished using the staple
unit.
Replace the toner cartridge
with a new one.
Check the User Code permis-
sion condition.