Your Meter Display - Bayer HealthCare Contour User Manual

®
C
Your Meter:
ONTOUR
Up/Down
Scroll Buttons
Test Strip Port
®
C
Your ONTOUR Test Strip:
Sample Tip
Blood sample
pulled in here.
®
M 2
Your
ICROLET
Cocking Handle
Release Button
Lancet Holder
Lancet
Endcap
Dial
Gray Adjustable Endcap
(FINGERTIPS)
2
Display
Memory Button
(On/Off, Memory
Recall, Enter)
Gray End
Insert this end into
the test strip port.
Lancing Device:
Grip Indent
Round
Protective Cap
Clear AST Endcap
(FOREARM OR PALM)

Your Meter Display:

The picture below shows all the symbols that appear on your meter
display. To view, with the meter off, press and hold ▲ or ▼. All dis-
play segments will appear for 10 seconds. If you need more than
10 seconds to check the display, press and hold ▲ or ▼ again.
While all characters are displayed, it is very important
to verify that is fully displayed. If there are missing
segments, see Error Codes and Symbols (page 34–36).
This may affect the way you see your results.
Top area on
Indicates sound
the display
is turned on.
presenting
date and time.
Pre-meal
result marker
Center area on the
display that shows either
your test result or any
Post-meal
error codes.
result marker
Indicates the meter is
ready to test.
Identifies a
Logbook entry.
Control result marker
Indicates Indicates it is too cold or
an alarm has too hot for your meter to
been set. test accurately.
or will
appear if the meter
is in 12 hour setup.
Indicates the
batteries are low
and need to be
changed.
Day/month format
Results are
displayed as
mg/dL or mmol/L.
The 7 appears
when viewing 7 day
HI–LO summary.
Indicates Average.
3