Bayer HealthCare Contour next link Quick Reference Manual

Wireless Blood Glucose
Monitoring System
®
Uses only C
ONTOUR
Glucose Test Strips from Bayer
QUICK REFERENCE GUIDE
Charging the Meter
1
Remove the cap with
USB connector.
The C ® N
ONTOUR EXT
permanent rechargeable battery.
Charge your meter with the wall charger
plugging the USB connector into a computer. Be
sure the computer is turned on.
Your meter will briefly display "Do Not Test–Charging"
and the test strip port light will flash. You cannot do
a blood glucose test while the battery is charging.
When charging is finished, the test strip port light
will turn off. Unplug your C
to test.
Unplug Meter From Charging From Charging
Source Before Beginning Setup e Beginning
2
To begin setup, up,
hold down top op
Menu button n
for several
seconds until til
the meter turns on. rns on
3
Scroll down to select
your language and
press OK.
Press OK if the correct language is displayed.
Press NO if the incorrect language is displayed.
Press OK to begin the
4
connection process.
NOTE: Pump refers to your
compatible Medtronic device.
5
STOP. Do NOT press
ANY buttons.
This screen displays the meter
ID number (in the bottom
left corner). This ID is needed to complete the
connection process.
Put down your meter. Pick up the compatible
Medtronic device and continue with Step 6.
Connecting Meter to MiniMed
Insulin Pump
6
Press ACT to go to
the MAIN MENU.
Scroll to Utilities by
pressing the down
arrow. Press ACT.
Scroll to Connect Devices and press
7
ACT. Then scroll to Meters and
press ACT.
Note: If your UTILITIES MENU does not
contain Connect Devices, scroll to
Meter Options and press ACT.
Select On and press ACT. If you are
8
replacing a meter, go to Step 9. If
you are adding a new meter, go to
Step 11.
To replace a meter, select Delete ID
9
and press ACT.
10
If you have multiple meter IDs,
repeat Step 9 for each one.
?
= Help
* Charger is available separately from Bayer Customer Service if not
included in your meter kit. See contact information for Bayer Customer
Service on opposite page.
® ®
12:00PM
METER BG
5.2
mmol/L
® N Blood
EXT
Initial Setup of the Meter and Connection to
Compatible Medtronic Device
on it to reveal the
LINK meter from Bayer has a
* or by
N LINK meter
ONTOUR EXT
g Se Setu tup p
LANGUAGE LANGUAGE
English
Deutsch
Español
CONNECT TO PUMP CONNECT TO PUMP
Connect to a MiniMed
Pump?
CONNECT TO PUMP CONNECT TO PUMP
Enter this Meter ID
into your Pump:
123456
® Paradigm
MAIN MENU
Basal
Reservoir + Set
Utilities
UTILITIES MENU
Alarm Clock
Connect Devices
Block
DEVICE OPTIONS
Meters
Remotes
Other Devices
METER OPTION
Off
On
METER ID MENU
Add ID
Delete ID
Review ID
DELETE METER ID
1. aaaaaa
2. bbbbbb
3. ------
FRONT VIEW
Test Strip
Port Light
12:00PM l 10/13 12:00PM l 10/13
5.2
mmol
Before Meal
Test Strip Port
Note: Check the units of measure of your meter.
See your meter user guide for complete instructions.
To add a new meter, select Add ID and
11
press ACT. Refer to Step 5 (or see
meter back) to find meter ID (SN).
Use the up and down arrow buttons
to enter the six character meter ID
shown on the meter screen.
Press ACT after each character entry.
Select Review ID on
12
your compatible
Medtronic device
to confirm that your
C
ONTOUR
meter ID has been
correctly entered. If
incorrect, go back to
Step 9.
NOTE: For detailed instructions, see
your compatible Medtronic device
user guide.
13
Return to your
C
ONTOUR
meter. After you have
entered the meter ID into
your compatible Medtronic device, press Next.
Choosing Meter Send Options
SEND OPTIONS controls how your
14
meter will send blood glucose
readings to your compatible
OK OK
Medtronic device.
Choose the SEND OPTION that is best for you.
Always = Meter will always send results.
Ask Me = Meter will ask you before sending results.
Never = Meter will never send results.
?
Set Meter Date/Time to Match Medtronic Device
OK OK
Skip Skip
15
The date and time on
your meter must match
the date and time
on your Medtronic
?
device. Pick up
Next Next
Medtronic device.
Go Back Go Back
Press ACT to go
to the MAIN MENU.
Scroll to Utilities
and press ACT.
Scroll to
Time/Date and press ACT. Select a time format and
press ACT. Note the time and date.
®
Return to your meter. Follow instructions on your
meter to change the time and date to match your
Medtronic device.
Additional Meter Settings
Press Accept to select
16
AutoLog is Off.
AutoLog allows you to
mark a test result as
Fasting, Before Meal, After Meal, or No Mark.
See your user guide to learn more.
Accept or Change High and
17
Low Alerts.
The meter alerts you with a
sound when your blood sugar
level is above or below your set levels.
Accept or Change your
18
Target range.
The Target range is your
goal for your blood sugar
test results.
NOTE: Alerts can only be set outside your selected
Target Range(s). Targets can only be set inside your
selected Alert level(s). For additional information, you
may contact Customer Service. Contact information
for Bayer Customer Service is on the next page.
SETUP IS NOW COMPLETE!
Turn the page over to see testing instructions.
Top Menu
Display
Button
Screen
USB
Connector
L
Reminder Reminder
Notes Notes
Selection/
Scrolling Buttons
r each character entry.
METER ID MENU
Add ID
Delete ID
Review ID
® N LINK
EXT
CONNECT TO PUMP CONNECT TO PUMP
Enter this Meter ID Enter this Meter ID
N LINK
EXT
into your pump: into your pump:
123456 123456
SEND OPTIONS SEND OPTIONS
Automatically send
results to the Pump?
12:00P 1 1 1 00P 1 2:
ST ST STA STA STA STAT STAT STAT STATUS US US US
Batt Batt Batt Ba Batt t t t t ery: ery: ery e e ry: Nor
M M on n n 11 OCT 2
S/N# S/N# S/N# S/N# S/N# S/N# S/N# N N N# N N # N
CURRENT DATE & TIME CURRENT DATE & TIME
10/11/10 10/11/10
12:00PM 12:00PM
AUTOLOG AUTOLOG
AutoLog is Off.
HIGH AND LOW ALERTS HIGH AND LOW ALERTS
High: 13.9 High: 13.9
Low: 3.9 Low: 3.9
TARGET TARGET
TOP VIEW
Protective
USB Cap
METER ID MENU
Add ID
Delete ID
Review
ADD METER ID
1 2 3 4 5 6
¯
REVIEW METER ID
1. 123456
2. ------
3. ------
?
Next Next
Go Back Go Back
Always Always
Ask me Ask me
Never Never
P P P P P P M M
U100 U100 U100 U100 00 0 0
Nor N Nor Nor r r r r r r r r mal mal mal mal m l l l l
C 2 2 2 2 0 0 0 0 0 0 10
454 454 454 454 454 454 454 4 454 454 4 4 056 056 056 6 056 056 056 056 056 056 56 56 56
Accept Accept
Change Change
?
Accept Accept
Turn On Turn On
?
mmol/L mmol/L
Accept Accept
mmol/L mmol/L Change Change
?
Accept Accept
3.9 – 10.0 3.9 – 10.0
Change Change
Setup is complete. Setup is complete.
Insert strip to start a Insert strip to start a
test. test.
¬