Contour Ts Meter Display - Bayer HealthCare Contour TS User Manual

C TS Meter Display:
ONTOUR
A full display, as shown below, indicates that all characters in the
display are working properly. You will briefl y see this display each
time you turn the meter on. You can see the complete display when
the meter is off by pressing and holding the
meter to the display shown below.
While all characters are displayed, it is most important to
verify that
see Error Codes and Symbols (page 27). This may affect the
way you see your results.
Indicates
the meter is
ready to test.
Control result
marker.
14 day
average.
Beeper on/off
indicator.
is fully displayed. If there is a difference,
Indicates it is too cold or
too hot for your meter
to test accurately.
Center area on the display
that shows either your test
result or any error codes.
Bottom area on
the display show-
ing date and time.
www.bayerdiabetes.com
button. Compare your
Indicates the
battery is low
and needs to be
changed.
Results are
displayed as
either mg/dL
or mmol/L.
or
Displays the
date format.
or
appear if the meter
is in 12 hour setup.
will
3