Transferring Results To A Computer - Bayer HealthCare Contour User Manual

To Cancel an Alarm:
When the meter is off, press
M to turn on the meter. The
date and time will appear
along with the .
Press ▲ or ▼ two times and
the alarm icon will disappear.
Press M to cancel the alarm.
After performing a test:
TO MARK RESULTS
Pre-Meal
Press ▲ or ▼
Alarm
Press ▲ or ▼
Post-Meal
Press ▲ or ▼
Logbook
Press ▲ or ▼
28
Need Help? Call toll free: 1-800-348-8100
YOU WILL SEE TO SET
Press M
(Flashing)
Press M
(Flashing)
Press M
(Flashing)
Press M
(Flashing)

Transferring Results to a Computer:

You can transfer test results from the C
computer, where they can be summarized in a report with graphs
and tables. To make use of this feature, you need Bayer's diabetes
management software—GLUCOFACTS
data cable from Bayer. For a free download of the software
go to www.bayerglucofacts.com
IMPORTANT: The C
ONTOUR
or certified by Bayer for use with any software other
than Bayer's diabetes management software. Bayer is
not responsible for any erroneous results from the use
of other software.
YOU WILL SEE WHAT IT MEANS
Result is marked as a pre-meal test.
You can now set an alarm.
Alarm is set to go off in the amount
of time you have set (1.0 –2.5 hours)
to remind you to run a post-meal
test.
Result is marked as a post-meal
test.
Result is marked in memory as
unique. You should note this in your
Clinilog
www.bayerdiabetes.com/us
® meter to a
ONTOUR
® DELUXE—and a
meter has not been tested
®
logbook.
29