Your Meter Display:
The picture below shows all the symbols that appear on your meter
display. To view, with the meter off, press and hold ▲ or ▼. All dis-
play segments will appear for 10 seconds. If you need more than
10 seconds to check the display, press and hold ▲ or ▼ again.
While all characters are displayed, it is very important
to verify that
ing segments, see Error Codes and Symbols (page
34). This may affect the way you see your results.
Top area on
the display
presenting
date and time.
Pre-meal
result marker.
Post-meal
result marker.
Identifies a
Logbook entry.
Indicates
an alarm has
been set.
is fully displayed. If there are miss-
Indicates sound
is turned on.
Center area on the
display that shows either
your test result or any
error codes.
Indicates the meter is
ready to test.
Control result marker.
Indicates it is too cold or
too hot for your meter to
test accurately.
or
will
appear if the meter
is in 12 hour setup.
Indicates the
batteries are low
and need to be
changed.
Day/month format.
Results are
displayed as
mg/dL or mmol/L.
The 7 appears
when viewing 7 day
HI–LO summary.
Indicates Average.
3