Setting Advanced Mode (L-2) Features - Bayer HealthCare Contour User Manual

Setting Advanced Mode (L-2) Features:

If you selected Advanced
Mode (L-2 on your display)
you can change your meter's
personal low and high blood
glucose settings. By person-
alizing these settings, your
C ® meter will help you
ONTOUR
track these HI and LO results.
The LO setting will flash
(default 72). To change this
setting, press ▲ or ▼ until
you reach your desired LO
setting, and then press M to
set. (The range of values for
LO is 60-90 mg/dL.)
Your HI blood glucose setting
will now flash (default 180).
To change, press ▲ or ▼
until you reach your desired
HI setting. Press M to set.
(The range of values for HI
is 100–250 mg/dL.)
Post-Meal Test Alarm Set-up:
To change the alarm time for
post-meal testing, press ▲
or ▼ to display the options
available. Select 2.5, 2.0,
1.5, or 1.0 hour(s) to set your
post-meal alarm (default is
2.0 hours). Press M to set.
24
Need Help? Call toll free: 1-800-348-8100
You have now completed your
C ® meter set-up for
ONTOUR
Advanced Mode!
Using the Markers:
If you have set-up your
meter in Advanced Mode,
your meter will display three
markers after you test your
blood.
Pre-meal = Marks a
test result that was taken
before a meal.
Post-meal = Marks a
test result that was taken
after a meal.
Logbook = The logbook
marker can be used to mark any result as being unique
or different in some way, and for which you may want to
make notes in your Clinilog
with this symbol next to it in the memory will help
remind you that there is more information recorded
about this test result.
Please see the following pages to use these options.
www.bayerdiabetes.com/us
® logbook. Seeing a result
25