Callback Retry Delay S76
The length of time that the modem waits, after an unsuccessful attempt
to connect to the remote unit at the programmed callback number,
before trying to place the call again. The default is 15 seconds.
Bit
Value Command Description
7-0
0-255
--
Lockout Threshold S77
Set the number of incorrect remote user password attempts that can be
made before the call is dropped. The default is 0. When remote
configuration is active, the lockout occurs after seven attempts.
Bit
Value Command Description
7-0
0-255
--
Autocallback Timer S78
The S78 register specifies the time in seconds that the modem waits
before initiating autocallback. The default is 30 seconds.
Bit
Value Command Description
7-0
0-255
--
Break Length S79
The S79 register sets the length of the break sent to the DTE when a
break signal is received. The range is from 1-255 in 20 ms increments.
The default is 35 (700 ms).
Bit
Value Command Description
7-0
0-255
\B
\Bn
Time in seconds (0 = disable)
Number of incorrect password attempts
(0 = disable)
Time in seconds before autocallback
Send break
Set break length (n=1-255)
Modem 3600
Status Registers
10-25