Table of Contents
Advertisement
Hardware Options
Factory Option Set #3
(Synchronous Dial-up)
(AT&F3)
MODEM OPTIONS
DCE rate - 33600
Modulation automode
V.34 rate threshold low *
V.34 asymmetric rate disabled *
Normal originate
Fast train disabled
Auto retrain enabled
SQ auto rate disabled
Transmit clock internal
Dial line
Jack type RJ11
Line current disconnect long
Long space disconnect disabled * Call timeout 30 seconds
V.22 guard tone disabled
PROTOCOL OPTIONS
LAPM protocol disabled *
MNP protocol disabled *
Direct buffer mode *
DTE flow control disabled *
DCE flow control disabled *
XON/XOFF pass through disabled DCD normal
Inactivity timer off
Break control 0 *
V.42 fast detect disabled *
SPEAKER OPTIONS
Volume low
On until carrier detect
Indicates variation from factory option set #1
*
E-30
TEST OPTIONS
Bilateral digital loop disabled
DTE local test disabled
DTE remote test disabled
Remote commanded test enabled
Test timeout off
DIAL LINE OPTIONS
Tone dial
Auto dial #1
Wait for dial tone
Wait delay 2 seconds
Pause delay 2 seconds
Answer on 1 ring
Autocallback disabled
DTE OPTIONS
Sync data *
Dial method manual *
AT command set disabled *
DTR disconnects *
DSR normal *
CTS follows RTS *
RTS/CTS delay 0 ms *
DTE fallback disabled
Options retained at disconnect
Modem 3600
Advertisement
Table of Contents
