Table of Contents
Advertisement
Factory Option Set # 6
(Asynchronous 4-wire Leased Line without V.42bis Protocol)
(AT&F6)
MODEM OPTIONS
DCE rate - 33600
V.34 modulation *
V.34 rate threshold low *
V.34 asymmetric rate enabled
Normal originate
Fast train disabled
Auto retrain enabled
SQ auto rate disabled
Transmit clock internal
Leased line, 4-wire *
Transmit level - 0 dBm *
Dial backup manual *
Lookback timer - 15 min *
Jack type RJ11
Line current disconnect long
Long space disconnect enabled
V.22 guard tone disabled
PROTOCOL OPTIONS
LAPM protocol disabled *
MNP protocol disabled *
Normal buffer mode
Constant DTE speed
DTE flow control disabled *
DCE flow control disabled *
XON/XOFF pass through disabled DTE fallback disabled
Inactivity timer off
Break control 0 *
V.42 fast detect disabled *
SPEAKER OPTIONS
Volume low
On until carrier detect
Indicates variation from factory option set #1
*
TEST OPTIONS
Bilateral digital loop disabled
DTE local test disabled
DTE remote test disabled
Remote commanded test enabled
Test timeout off
DIAL LINE OPTIONS
Tone dial
Auto dial #1
Wait for dial tone
Wait delay 2 seconds
Pause delay 2 seconds
Call timeout 30 seconds
Answer on 1 ring
Autocallback disabled
DTE OPTIONS
Async data
DTE rate - 115200
8 bit, no parity
AT command set enabled
Ignores DTR *
DSR forced high
DCD normal
CTS forced high
Options retained at disconnect
Modem 3600
Hardware Options
E-33
Advertisement
Table of Contents
