Table of Contents
Advertisement
V.25 bis Autodialer
The separator {sep} for BISYNC is an
<etb><sp><sp><stx>LSO<sp>
sequence for the sync format (the last LSO string terminates with <etx>
per V.25 bis). For synchronous bit oriented operation, each LSO string
is treated as an individual message per V.25 bis.
If no parameters follow, all stored options are sent to the DTE as
LSOxxx;ooo{sep}xxx;ooo...
Each value must be padded with leading zeros so that each field has
three characters. Option zero would be sent as
LSO000;000
If only an address follows the command, the single requested option is
sent to the DTE as
LSOxxx;ooo
If address and count follow the command, the requested count of
options starting with the specified address are sent to the DTE as
LSOxxx;ooo{sep}xxx;ooo...
Options
You can change the options for the V.25 bis autodialer using the PRO
command or list them using the RLO command. Options are listed in
Table 11-2.
Table 11-2. V.25 Autodialer Options
Option
Definition
002:
Intermediate call progress
messages
003:
Blind dial
007:
Long space disconnect
11-14
Settings
0 - Disable
1 - Enable
0 - Disable
1 - Enable
0 - Disable
1 - Enable
Modem 3600
Default
0
0
1
Advertisement
Table of Contents
