Table of Contents
Advertisement
Hardware Options
Factory Option Set #5
(Asynchronous 4-wire Leased Line with V.42bis Protocol)
(AT&F5)
MODEM OPTIONS
DCE rate - 33600
V.34 modulation *
V.34 rate threshold high
V.34 asymmetric rate enabled
Normal originate
Fast train disabled
Auto retrain enabled
SQ auto rate disabled
Transmit clock internal
Leased line, 4-wire *
Transmit level - 0 dBm *
Dial backup manual *
Lookback timer - 15 min *
Jack type RJ11
Line current disconnect long
Long space disconnect enabled
V.22 guard tone disabled
PROTOCOL OPTIONS
LAPM protocol enabled
MNP protocol disabled *
Protocol fallback disabled *
Data compression normal
Constant DTE speed
DTE flow control RTS
DCE flow control CTS
XON/XOFF pass through disabled Options retained at disconnect
Inactivity timer off
Break control 5
V.42 fast detect enabled
SPEAKER OPTIONS
Volume low
On until carrier detect
Indicates variation from factory option set #1
*
E-32
TEST OPTIONS
Bilateral digital loop disabled
DTE local test disabled
DTE remote test disabled
Remote commanded test enabled
Test timeout off
DIAL LINE OPTIONS
Tone dial
Auto dial #1
Wait for dial tone
Wait delay 2 seconds
Pause delay 2 seconds
Call timeout 30 seconds
Answer on 1 ring
Autocallback disabled
DTE OPTIONS
Async data
DTE rate - 115200
8 bit, no parity
AT command set enabled
Ignores DTR *
DSR forced high
DCD normal
CTS forced high
DTE fallback disabled
Modem 3600
Advertisement
Table of Contents
