Table of Contents
Advertisement
V.25 bis Autodialer
Intermediate Call Progress Response
The following response is given only if enabled. See Option Definition
002 below.
CNX@nnnnnBPS
where nnnnn is the line speed. This connect response appears after
handshake completed, but before DSR is activated. This response is
required if the intermediate call progress option is enabled.
Dial Stored Number CRS a
The command for dialing a stored number is CRS followed by the one
digit address a for the stored number to be dialed.
Responses:
Same as for the CRN command plus
CFINSCall failure - number not stored.
If the number is linked with other numbers via a PRL command, failure
responses are returned as
{sep}a;{call progress messages} . . .
where a is the address dialed, followed by the separator field and call
progress messages (CFI, etc.).
If the call fails to connect and the number is linked with other numbers,
the autodialer tries to call the next number in the list of linked numbers.
11-6
Modem 3600
Advertisement
Table of Contents
