Exit/Entry Delay - GE Simon XT V2 User Manual

To arm doors and windows (level 2):
1. Ensure that all doors and windows are closed.
2. Press Doors+Windows.
3. Enter your code when the display shows Enter Code, if a code is required.
The panel displays Doors + Windows, speaks Doors and Windows On, and the
Doors+Windows button lights up.
The panel starts an exit delay and sounds exit beeps in groups of two until the exit
delay expires.
To arm motion sensors (level 3):
1. Press Motions.
2. Enter your code when the display shows Enter Code, if a code is required.
The panel displays Motions, speaks Motions On, and the Motions button lights.
The panel starts an exit delay and sounds exit beeps in groups of three until the
exit delay expires.
To arm doors, windows, and motion sensors (level 4):
1. Press Doors+Windows.
2. Enter your code when the display shows Enter Code, if a code is required.
3. While the panel is in the process of arming, press Motions.
The panel displays Doors + Windows & Motions, speaks Doors and
Windows On, Motions On, and the Doors+Windows and Motions buttons light up.
The panel starts an exit delay and sounds exit beeps in groups of four until the
exit delay expires.

Exit/entry delay

Your Simon XT provides a delay after entering or exiting your home before the system
is alarmed. Table 5 below provides details for the entry and exit delay features.
Table 5: Entry and exit delay details
Function
Entry delay
Simon XT V2 User Manual
Description
Some active sensors cause immediate alarms when tripped. Other
sensors, if enrolled in a delayed response group, start an entry delay
that lets you enter the premises and disarm the system. When you
enter your home, you will hear beeps during the entry delay (see "Status
beeps" on page 16). If the system has not been disarmed by the end of
the entry delay, an alarm occurs.
The entry delay time is programmed by the installer.
9