GE Simon XT V2 User Manual page 12

Function
No delay
Exit delay
Protest during arming
Silent exit
The silent exit feature silences the status beeps that accompany the exit delay. Press
Silent after you arm the system to silence status beeps. The panel will still beep at the
beginning and end of the exit delay.
Note: Enabling silent exit doubles the exit delay time.
No entry delay
Use the no entry delay feature when you are staying at home, or when you are away
from home and will carry a wireless touchpad to disarm the system before opening a
protected door. Check with your installer to find out how this option is programmed.
1. Close all door and windows.
2. Press Doors+Windows twice. If a code is required for arming, enter your code
after the first press of the Doors+Windows button, and then press the button
again.
The panel displays Doors + Windows – No Delay and speaks Doors and
Windows On, No Entry Delay. The Doors+Windows light will blink and the exit
delay will begin.
Note: To avoid causing an alarm, you must disarm the system with a wireless
touchpad before entering your home.
Quick exit
Use the quick exit feature when you want to briefly leave the house while the system
is stilled armed (for instance to get the newspaper). This feature must be enabled by
your installer. When you press the Disarm button, the display shows Exit Time Is
On. This allows a designated exit door to be open for up to 2 minutes without
triggering an alarm.
10
Description
If the system was armed with the no delay feature activated, there will
be no entry delay and the alarm will occur immediately.
The exit delay is the amount of time the system gives you to exit the
home before the system is armed. During the delay, you can vacate the
premises through a delayed response door without causing an alarm.
Beeps will sound during the exit delay (see "Status beeps" on page 16).
The exit delay time is programmed by the installer.
The system may protest an arming level change if certain abnormal
conditions exist. If a sensor that is active in the requested arming level
is open, the system sounds protest beeps and automatically bypasses
the open sensor (depending on the system configuration).
Simon XT V2 User Manual