GE Simon XT V2 User Manual page 30

Panel voice. (Spoken phrases on the speaker and key press sounds from the
speaker heard while the controlling the system.) This option determines whether
the panel speaks status messages and arming level changes. To program panel
voice:
1. Enter the System Programming menu.
2. Scroll until the display shows Siren Options, and then press OK.
3. Scroll until the display shows Panel Voice, and then press OK.
The current value of this option flashes (On or Off).
4. Scroll to the desired value, and then press OK.
5. Press Status repeatedly to exit.
Panel piezo alarms. (Loud alarms on the siren). This option determines whether
the panel sounds alarm beeps. To program panel piezo alarm:
1. Enter the System Programming menu.
2. Scroll until the display shows Siren Options, and then press OK.
3. Scroll until the display shows Panel Piezo Alarm, and then press OK.
The current value of this option flashes (On or Off).
4. Scroll to the desired value, and then press OK.
5. Press Status repeatedly to exit.
Status beep volume. This option sets the volume of nonalarm beeps. The
numerical range is 1 to 10. The default value is 7. To program status beep volume:
1. Enter the System Programming menu.
2. Scroll until the display shows Siren Options, and then press OK.
3. Scroll until the display shows Status Beep Volume, and then press OK.
The current value of this option flashes (1 to 10).
4. Scroll to the desired value, and then press OK.
5. Press Status repeatedly to exit.
28 Simon XT V2 User Manual