System Tests; Revision; Contrast; System Programming - GE Simon XT V2 User Manual

Note: This menu option will not appear if special chime sensors are not in your
system.

System tests

This menu lets you run sensor and communication tests, and initiate a phone call
from the panel to Enterprise Downloader. For more information, see "Testing" on
page 30.

Revision

This menu is a read-only display of the system's firmware version. Press Status to exit.

Contrast

To adjust the contrast of the display:
1. Scroll until the display shows Contrast, and then press OK.
2. Scroll to increase or decrease the contrast setting. (There are eleven contrast
levels.)
3. Press Status to save the setting and exit.
Note: Changes in contrast are more noticeable when not looking at the display
straight on.

System programming

To enter system programming mode:
1. Enter the System menu.
2. Scroll until the display shows System Programming, and then press OK.
The display shows Enter Code.
3. Enter your master code, and then press OK.
At this point, you are in the System Programming submenus. At this level, the
following submenus are accessible:
• Access codes
• Security
• Phone #s
• Timers
• Siren options
• System tests
24 Simon XT V2 User Manual