Table of Contents
Advertisement
User Guide
4. Windows ME: When the System Settings Change screen appears, the USB drivers are installed properly
(Figure 20). Click Yes.
Congratulations! You have completed the software installation for the USB drivers. After the computer has
restarted, VersaLink is ready for use. You must now go to section 8 for instructions on configuring VersaLink for
Internet connection.
7.3 Installing the USB Driver for Windows 2000
IMPORTANT: Confirm that the CD-ROM provided with the VersaLink kit is inserted in the
!
appropriate drive before continuing this installation.
1. Windows 2000: After you connect VersaLink to your PC, the Found New Hardware window will appear
(Figure 21). After a brief delay, the Found New Hardware Wizard will appear (Figure 22). Click Next.
030-300408 Rev. B
Figure 20. Windows ME
Figure 21. Windows 2000
Figure 22. Windows 2000
26
VersaLink™ Gateway (Model 327W)
August 2005
Hide quick links:
Advertisement
Table of Contents
