Westell Technologies Versalink 327W User Manual page 125

User Guide
13.6.9 RIP
The following details will be displayed if you select RIP from the Advanced WAN menu. If you change any
settings in this screen, click on save. If you click on reset, this screen will refresh and display your last saved RIP
configuration.
RIP (Routing Interface Protocol) is a dynamic inter-network routing protocol primarily used in interior routing
environments. A dynamic routing protocol, as opposed to a static routing protocol, automatically discovers routes
and builds routing tables.
Note: In this screen, VersaLink represents 'Gateway.'
RIP Enable
Interface Type
Receive
030-300408 Rev. B
Factory Default = DISABLED
If this box is checked, RIP will be Enabled (turned ON).
RIP Configuration
LAN: Select this if you are configuring RIP for the LAN side.
WAN: Select this if you are configuring RIP for the WAN side. (WAN side is
receive only.)
The version of RIP to be accepted.
Possible responses are:
None
RIPv1
RIPv2
125
VersaLink™ Gateway (Model 327W)
August 2005