Westell Technologies Versalink 327W User Manual page 101

User Guide VersaLink™ Gateway (Model 327W)
After a brief delay, the home page will be displayed. Confirm that you have a DSL sync and that your PPP session
displays UP. (Click on the connect button to establish a PPP session).
13.6.2.2 Disabling DSLATM PORT – Enabling ETHERNET PORT 1
To configure the VersaLink so that it uses the WAN Ethernet Port, select ETHERNET PORT 1 from the WAN
PORT drop-down arrow. By selecting ETHERNET PORT 1, you will disable the VersaLink's DSL transceiver.
This will disable the DSL Port and allow the WAN interface to use the WAN Ethernet Port.
NOTE: If ETHERNET PORT 1 is configured, the VersaLink's menu options may or may not be displayed. The
sections explained throughout this document will indicate when a menu item is unavailable. The UPLINK feature is
optional, and if UPLINK is not enabled in the .ini file, the Gateway will use DSL and Wireless only.
030-300408 Rev. B 101 August 2005