Westell Technologies Versalink 327W User Manual page 113

User Guide
If you selected VLAN Bridge under VC 1- Bridge Settings, the following screen will be displayed. Enter the
appropriate values in the fields and click on set VC.
Mode
VLAN ID
VLAN Priority
VLAN on WAN
030-300408 Rev. B
VC 1 - Bridge Settings (VLAN Bridge)
The Mode you have selected to use with Bridge protocol.
VLAN is used to assign VLAN tags to individual data ports on the modem.
Assigns a VLAN ID to the port.
This will set the VLAN priority for the port.
Factory Default = DISABLE
Selecting Enable allows VLAN tagging to occur according to the data port's
configuration.
113
VersaLink™ Gateway (Model 327W)
August 2005