Installing The Usb Drivers - Westell Technologies Versalink 327W User Manual

User Guide

7. INSTALLING THE USB DRIVERS

If you are using only Ethernet or Wireless connections, USB driver installation is not necessary. The Microsoft®
Plug and Play auto-detect feature recognizes when new hardware has been installed. After you connect VersaLink to
the PC, VersaLink will be detected automatically.
Before you begin the USB software installation, determine which operating system is installed on your PC, and then
follow the installation instructions that match your operating system. When the installation has completed, proceed
to section 8 in the User Guide to configure VersaLink for Internet connection. The following table provides a
reference to the USB driver installation instructions.
Your Operating System
Windows 98 SE
Windows ME
Windows 2000
Windows XP
7.1.1 CD-ROM Installation:
1. Place the CD-ROM that you received in the VersaLink kit into the CD-ROM drive of the PC that is connected
to the USB port.
2. Verify the connection to the computer by observing the state of the USB LED. Once the USB drivers have been
installed, the USB LED should be solid green. Solid green indicates a USB connection has been established.
3. Go to the USB driver installation section that matches your operating system and follow the procedures outlined
in that section.
NOTE: The actual information displayed in the USB screens may vary according to product.
7.1.2 Installing the USB Drivers for Windows 98 SE
IMPORTANT: Confirm that the CD-ROM provided with the VersaLink kit is inserted in the
!
appropriate drive before continuing this installation.
1. Windows 98 SE: After you connect VersaLink to your PC, the Found New Hardware window will appear
(Figure 4). After a brief delay, the Add New Hardware Wizard window will appear (Figure 5) Click Next.
030-300408 Rev. B
Refer to this section for USB driver instructions
Installing the USB Driver for Windows 98 SE
Installing the USB Driver for Windows ME
Installing the USB Driver for Windows 2000
Installing the USB Driver for Windows XP
Figure 4. Windows 98 SE
18
VersaLink™ Gateway (Model 327W)
August 2005