Security; Ip Filtering - Comtrend Corporation WAP-5813n User Manual

To Activate the DMZ host, enter the DMZ host IP address and click Save/Apply.
To Deactivate the DMZ host, clear the IP address field and click Save/Apply.

5.5 Security

To display this function, you must enable the firewall feature in WAN Setup.
For detailed descriptions, with examples, please consult
5.5.1

IP Filtering

This screen sets filter rules that limit IP traffic (Outgoing/Incoming). Multiple filter
rules can be set and each applies at least one limiting condition. For individual IP
packets to pass the filter all conditions must be fulfilled.
NOTE: This function is not available when in bridge mode. Instead,
(pg. 30) performs a similar function.
OUTGOING IP FILTER
By default, all outgoing IP traffic is allowed, but IP traffic can be blocked with filters.
To add a filter (to block some outgoing IP traffic), click the Add button.
Appendix A –
27
Firewall.
MAC Filtering