Comtrend Corporation WAP-5813n User Manual page 23

Enable LAN side firewall: Enable by ticking the checkbox
DHCP Server:
Static IP Lease List: A maximum 32 entries can be configured.
To add an entry, enter MAC address and Static IP and then click Save/Apply.
To remove an entry, tick the corresponding checkbox
then click the Remove Entries button, as shown below.
DHCP Server Relay: Enable with checkbox
Vendor Class ID:
To add an entry, click Add Entries. The following screen will display.
To enable DHCP, select Enable DHCP server and enter Start
and End IP addresses and the Leased Time. This setting
configures the router to automatically assign IP, default
gateway and DNS server addresses to every PC on your LAN.
This allows the Router to relay the DHCP packets to the
remote DHCP server. The remote DHCP server will provide
the IP address. This option is hidden if NAT is enabled or
when the router is configured with only one Bridge PVC.
A maximum 32 entries can be configured. To remove an
entry, tick the corresponding checkbox
column and then click the Remove Entries button.
in the Remove column and
and enter DHCP Server IP address.
22
.
in the Remove