Restore Default - Comtrend Corporation WAP-5813n User Manual

8.1.3

Restore Default

Click Restore Default Settings to restore factory default settings.
After Restore Default Settings is clicked, the following screen appears.
Close the browser and wait for 2 minutes before reopening it. It may also be
necessary, to reconfigure your PC IP configuration to match your new settings.
NOTE: This entry has the same effect as the Reset button. The WAP-5813n
board hardware and the boot loader support the reset to default. If the
Reset button is continuously pressed for more than 5 seconds, the boot
loader will erase the configuration data saved in flash memory.
59