Comtrend Corporation WAP-5813n User Manual page 22

NOTE: NAT is enabled so the DHCP Server Relay option is hidden above.
(see underlined notes below).
Consult the field descriptions below for more details.
LOCAL AREA NETWORK (LAN) SETUP
GroupName: You can ignore this checkbox.
IP Address: Enter the IP address for the LAN port.
Subnet Mask: Enter the subnet mask for the LAN port.
LOOPBACK IP AND SUBNETMASK
IP Address: Enter the IP address.
Subnet Mask: Enter the subnet mask.
Enable IGMP Snooping: Enable by ticking the checkbox
Standard Mode: In standard mode, multicast traffic will
flood to all bridge ports when no client subscribes to a
multicast group – even if IGMP snooping is enabled.
Blocking Mode: In blocking mode, the multicast data
traffic will be blocked and not flood to all bridge ports when
there are no client subscriptions to any multicast group.
21
.