Comtrend Corporation WAP-5813n User Manual page 29

On the following screen, enter your filter criteria and then click Apply/Save.
Consult the table below for field descriptions.
Field
Filter Name
Protocol
Source IP address
Source Subnet Mask
Source Port (port or port:port)
Destination IP address
Destination Subnet Mask
Destination Port (port or port:port)
INCOMING IP FILTER
By default, all incoming IP traffic is blocked, but IP traffic can be allowed with filters.
Description
The filter rule label
TCP, TCP/UDP, UDP, or ICMP.
Enter source IP address.
Enter source subnet mask.
Enter source port number or range.
Enter destination IP address.
Enter destination subnet mask.
Enter destination port number or range.
28