LG LW130W User Manual page 39

Initial Configuration and Operation
Wireless Access Point
> Press [Refresh] button to refresh the list of the wireless
LAN access points detected around. The figures on the
left show the strength of the signal, while the names of
the access points are displayed on the right.
> Click [Info] to display the detailed information for each
selected access point. Press [Add] button to add the
access points to connect to.
> The added access points are displayed on the right
panel of the screen. Choose the added access point
and press [Connect] button to establish a connection.
During the connection attempt, 'Connecting' will be
displayed on the right side (in case an IP address is
being assigned, 'IP assigning.') When the connection
is established, a message saying 'connected,' and when
a connection to a WPS is made, 'wps connected' will
be displayed, respectively.
> Press [Disconnect] to disconnect.
Note:
When a connection to a certain access point is made, you
may not use the 'Edit,' 'Delete,' and 'Connect' buttons.
To use these functionalities, disconnect from the AP first.
39