LG LW130W User Manual page 47

Initial Configuration and Operation
Event Schedule List
> Editing the Event Schedule List
1. Select an event trigger and press [Edit] button.
An event setup window will pop-up.
2. Make appropriate changes to the settings.
Trigger: The selected trigger event
•
Time: Set the day of the week, the time, pre-alarm
•
duration and Post alarm duration, and the duration
of the time during which the inputs will be ignored.
• Action: Set the actions to be taken as below.
- FTP Server /SMTP Server: Choose whether to upload
the image to an FTP server or send an e-mail to an
SMTP server.
- Control relay: Activate or deactivate a selected relay.
- SD Card Recording: Record the video feed to the
SD card when there is an event.
- Flash LED: Turns on the Flash LED when there is an event.
- Sound Alert: Strike up a sound alarm in case of an event.
Stream: Choose the desired video feed stream from
•
the relevant camera.
3. Press [Save] button to save the changes in settings.
Note:
• In order to activate 'FTP server / SMTP server' settings,
a file server and/or mail server should be registered at
the event server setting sub menu under the event menu.
The recorded files of the event (motion detector/sensor
•
event) are split up by a 5 minutes duration.
In case the remaining free space in the SD card is 200MB
•
or below, the system stops recording or overwrites an
existing file in accordance with the [Overwrite] setting.
An overwritten file may cause error or would not play
when you try to open the file.
Set the video codec to MJPEG, and the video recorded
•
on the SD card will have only one frame per second.
When you are recording the master stream video using
•
a FTP Server/SD Card, if the maximum frame rate set
for the master stream is higher than 10, the maximum
frame rate and GOP are automatically set to 10. In the
meantime, if the max frame rate is 10 or below, the GOP
will be set to the same rate as the maximum frame rate.
Also, regardless of the maximum frame rate, the quality
settings will automatically be set to CBR and the GOP
configuration item will disappear. The maximum values
configurable in this case are, respectively, 10 for the maximum
frame rate, CBR for quality, and 6144kbps for the bit rate.
47