LG LW130W User Manual page 36

Initial Configuration and Operation
TCP/IP
IP Address status
> Automatically set with DHCP: Click on this radio button
if you wish to use DHCP mode. The network settings
are automatically configured by the DHCP server.
- Notify to SMTP server, if IP address is changed: With
this option activated, the system will notify the user
with the new IP address each time it changes by sending
an e-mail.
36
Note:
To use this functionality, the mail server should be registered
within the event server configuration.
> Statically set: Manually configure the network settings.
-
IP address: Input the IP address here.
-
Subnet mask: Input the subnet mask address here.
-
Gateway: Input the gateway address here.
DNS Server status
> Primary DNS Server: Input the main DNS server
address here.
A DNS (Domain Name Service) changes the domain
name into an IP address within the network.
> Secondary DNS Server: Input the address of the Secondary
DNS Server.
• Save: Click this button to save the changes you made.