LG LW130W User Manual page 26

Initial Configuration and Operation
Time mode
> Synchronize with NTP Server: Sets the time of the system
according to the Sync. Interval configuration of your
system. Input the IP address or the URL of the NTP
server and select the interval of the synchronization
with it.
You can also test the NTP server you set by pressing
the [Test] button.
> Synchronize with personal computer: Synchronize with
the clock of your local system to configure the time and
date.
> Synchronize manually: Input the time and date of the
system manually.
Note:
• Rebooting the system after setting the time may cause
the system clock lag. To maintain precise time, we
recommend you select [Synchronize with NTP server]
mode.
• If you are using the recording server both for the recording
and as an NTP server, refer to the NTP configuration
instructions for the OS of the recording server.
26
Server time
> Server time: Displays the current date and time of the
IP device.
• Save: Click [Save] button to save the changes you made
in this menu.